TY - JOUR AU - Abdullah, I. AU - Blackburn, R. S. AU - Russell, S. J. AU - Taylor, J. PY - 2006 DA - 2006// TI - Abrasion phenomena in twill tencel fabric JO - Journal of Applied Polymer Science VL - 102 UR - https://doi.org/10.1002/app.24195 DO - 10.1002/app.24195 ID - Abdullah2006 ER - TY - JOUR AU - Carvalho, R. AU - Silveira, D. AU - Ferreira, N. AU - Ferreira, C. AU - Monteiro, F. AU - Sampaio, S. AU - Fangueiro, R. PY - 2015 DA - 2015// TI - Development of High-performance Single Layer Weft Knitted Structures for Cut and Puncture Protection JO - Journal of Textile Science & Engineering VL - 5 ID - Carvalho2015 ER - TY - JOUR AU - Ceballos, D. M. AU - Tapp, L. C. AU - Wiegand, D. M. PY - 2014 DA - 2014// TI - Case studies: Evaluation of cut-resistant sleeves and possible fiberglass fiber shedding at a steel mill JO - Journal of occupational and environmental hygiene VL - 11 UR - https://doi.org/10.1080/15459624.2013.852283 DO - 10.1080/15459624.2013.852283 ID - Ceballos2014 ER - TY - STD TI - Chediak, J. A., Young, L. C., & Edson, D. L. (1998). Ceramic bullet-proof fabric: Google Patents. ID - ref4 ER - TY - STD TI - Chou, T.-W., & Ko, F. K. (1989). Textile structural composites. Elsevier Science Publishers B. V, Sara Burgerhartstraat 25, P. O. Box 211, 1000 AE Amsterdam, The Netherlands, 1989. ID - ref5 ER - TY - JOUR AU - Colakoglu, M. AU - Soykasap, O. AU - Özek, T. PY - 2007 DA - 2007// TI - Experimental and numerical investigations on the ballistic performance of polymer matrix composites used in armor design JO - Applied Composite Materials VL - 14 UR - https://doi.org/10.1007/s10443-006-9030-y DO - 10.1007/s10443-006-9030-y ID - Colakoglu2007 ER - TY - JOUR AU - Ćwik, T. K. AU - Iannucci, L. AU - Curtis, P. AU - Pope, D. PY - 2016 DA - 2016// TI - Design and ballistic performance of hybrid composite laminates JO - Applied Composite Materials ID - Ćwik2016 ER - TY - JOUR AU - Decker, M. AU - Halbach, C. AU - Nam, C. AU - Wagner, N. AU - Wetzel, E. PY - 2007 DA - 2007// TI - Stab resistance of shear thickening fluid (STF)-treated fabrics JO - Composites Science and Technology VL - 67 UR - https://doi.org/10.1016/j.compscitech.2006.08.007 DO - 10.1016/j.compscitech.2006.08.007 ID - Decker2007 ER - TY - JOUR AU - Dixit, A. AU - Mali, H. S. PY - 2013 DA - 2013// TI - Modeling techniques for predicting the mechanical properties of woven-fabric textile composites: A review JO - Mechanics of Composite Materials VL - 49 UR - https://doi.org/10.1007/s11029-013-9316-8 DO - 10.1007/s11029-013-9316-8 ID - Dixit2013 ER - TY - JOUR AU - Messiry, M. PY - 2014 DA - 2014// TI - Investigation of puncture behaviour of flexible silk fabric composites for soft body armour JO - Fibres Text Eastern Eur J VL - 22 ID - Messiry2014 ER - TY - STD TI - Ertekin, M., & Erhan Kirtay, H. (2015). Cut resistance of hybrid para-aramid fabrics for protective gloves. The Journal of The Textile Institute, 1-8. ID - ref11 ER - TY - BOOK AU - Fan, Q. PY - 2005 DA - 2005// TI - Chemical testing of textiles PB - Elsevier Science CY - Amsterdam UR - https://doi.org/10.1533/9781845690694 DO - 10.1533/9781845690694 ID - Fan2005 ER - TY - JOUR AU - Fangueiro, R. AU - Carvalho, R. AU - Silveira, D. AU - Ferreira, N. AU - Ferreira, C. PY - 2015 DA - 2015// TI - Development of high-performance single layer weft knitted structures for cut and puncture protection JO - Journal of Textile Science & Engineering VL - 5 ID - Fangueiro2015 ER - TY - JOUR AU - Fritzsche, F. R. AU - Ramach, C. AU - Soldini, D. AU - Caduff, R. AU - Tinguely, M. AU - Cassoly, E. AU - Stewart, A. PY - 2012 DA - 2012// TI - Occupational health risks of pathologists-results from a nationwide online questionnaire in Switzerland JO - BMC Public Health VL - 12 UR - https://doi.org/10.1186/1471-2458-12-1054 DO - 10.1186/1471-2458-12-1054 ID - Fritzsche2012 ER - TY - STD TI - Golovin, K., & Phoenix, S. L. (2016). Effects of extreme transverse deformation on the strength of UHMWPE single filaments for ballistic applications. Journal of Materials Science, 1-12. ID - ref15 ER - TY - JOUR AU - Hou, L. AU - Sun, B. AU - Gu, B. PY - 2013 DA - 2013// TI - An analytical model for predicting stab resistance of flexible woven composites JO - Applied Composite Materials VL - 20 UR - https://doi.org/10.1007/s10443-012-9289-0 DO - 10.1007/s10443-012-9289-0 ID - Hou2013 ER - TY - JOUR AU - Huang, X. AU - Ke, Q. AU - Kim, C. AU - Zhong, H. AU - Wei, P. AU - Wang, G. AU - Jiang, P. PY - 2007 DA - 2007// TI - Nonisothermal crystallization behavior and nucleation of LDPE/Al nano-and microcomposites JO - Polymer Engineering & Science VL - 47 UR - https://doi.org/10.1002/pen.20784 DO - 10.1002/pen.20784 ID - Huang2007 ER - TY - JOUR AU - Jia, X. AU - Huang, Z. AU - Zu, X. AU - Gu, X. AU - Xiao, Q. PY - 2013 DA - 2013// TI - Effect of mesoscale and multiscale modeling on the performance of kevlar woven fabric subjected to ballistic impact: A numerical study JO - Applied Composite Materials VL - 20 UR - https://doi.org/10.1007/s10443-013-9325-8 DO - 10.1007/s10443-013-9325-8 ID - Jia2013 ER - TY - JOUR AU - Karahan, M. AU - Kuş, A. AU - Eren, R. PY - 2008 DA - 2008// TI - An investigation into ballistic performance and energy absorption capabilities of woven aramid fabrics JO - International Journal of Impact Engineering VL - 35 UR - https://doi.org/10.1016/j.ijimpeng.2007.04.003 DO - 10.1016/j.ijimpeng.2007.04.003 ID - Karahan2008 ER - TY - JOUR AU - LaBarre, E. AU - Calderon-Colon, X. AU - Morris, M. AU - Tiffany, J. AU - Wetzel, E. AU - Merkle, A. AU - Trexler, M. PY - 2015 DA - 2015// TI - Effect of a carbon nanotube coating on friction and impact performance of Kevlar JO - Journal of Materials Science VL - 50 UR - https://doi.org/10.1007/s10853-015-9088-8 DO - 10.1007/s10853-015-9088-8 ID - LaBarre2015 ER - TY - JOUR AU - Lim, J. AU - Zheng, J. Q. AU - Masters, K. AU - Chen, W. W. PY - 2011 DA - 2011// TI - Effects of gage length, loading rates, and damage on the strength of PPTA fibers JO - International Journal of Impact Engineering VL - 38 UR - https://doi.org/10.1016/j.ijimpeng.2010.11.009 DO - 10.1016/j.ijimpeng.2010.11.009 ID - Lim2011 ER - TY - JOUR AU - Loyd, A. M. AU - Berglund, L. AU - Twardowski, C. P. AU - Stuart, M. B. AU - Smith, A. M. AU - Gaz, D. V. AU - Stuart, M. J. PY - 2015 DA - 2015// TI - The most cut-resistant neck guard for preventing lacerations to the neck JO - Clinical Journal of Sport Medicine VL - 25 UR - https://doi.org/10.1097/JSM.0000000000000121 DO - 10.1097/JSM.0000000000000121 ID - Loyd2015 ER - TY - JOUR AU - Manich, A. AU - Castellar, M. AU - Sauri, R. AU - Miguel, R. AU - Barella, A. PY - 2001 DA - 2001// TI - Abrasion kinetics of wool and blended fabrics JO - Textile Research Journal VL - 71 UR - https://doi.org/10.1177/004051750107100601 DO - 10.1177/004051750107100601 ID - Manich2001 ER - TY - JOUR AU - Mayo, J. AU - Wetzel, E. PY - 2014 DA - 2014// TI - Cut resistance and failure of high-performance single fibers JO - Textile Research Journal VL - 84 UR - https://doi.org/10.1177/0040517513517966 DO - 10.1177/0040517513517966 ID - Mayo2014 ER - TY - JOUR AU - Mayo, J. B. AU - Wetzel, E. D. AU - Hosur, M. V. AU - Jeelani, S. PY - 2009 DA - 2009// TI - Stab and puncture characterization of thermoplastic-impregnated aramid fabrics JO - International Journal of Impact Engineering VL - 36 UR - https://doi.org/10.1016/j.ijimpeng.2009.03.006 DO - 10.1016/j.ijimpeng.2009.03.006 ID - Mayo2009 ER - TY - JOUR AU - O’Masta, M. AU - Compton, B. AU - Gamble, E. AU - Zok, F. AU - Deshpande, V. AU - Wadley, H. PY - 2015 DA - 2015// TI - Ballistic impact response of an UHMWPE fiber reinforced laminate encasing of an aluminum-alumina hybrid panel JO - International Journal of Impact Engineering VL - 86 UR - https://doi.org/10.1016/j.ijimpeng.2015.08.003 DO - 10.1016/j.ijimpeng.2015.08.003 ID - O’Masta2015 ER - TY - JOUR AU - Palaniswamy, K. AU - Mohamed, P. PY - 2006 DA - 2006// TI - Effect of the single-yarn twist and ply to single-yarn twist ratio on the hairiness and abrasion resistance of cotton two-ply yarn JO - Autex Research Journal VL - 6 ID - Palaniswamy2006 ER - TY - JOUR AU - Pandita, S. D. AU - Falconet, D. AU - Verpoest, I. PY - 2002 DA - 2002// TI - Impact properties of weft knitted fabric reinforced composites JO - Composites Science and Technology VL - 62 UR - https://doi.org/10.1016/S0266-3538(02)00057-X DO - 10.1016/S0266-3538(02)00057-X ID - Pandita2002 ER - TY - STD TI - Rameshkumar, C. (2014). Studies on cut resistance behaviour of Friction core spun yarn fabrics. ID - ref29 ER - TY - JOUR AU - Rebouillat, S. AU - Steffenino, B. AU - Miret-Casas, A. PY - 2010 DA - 2010// TI - Aramid, steel, and glass: characterization via cut performance testing, of composite knitted fabrics and their constituent yarns, with a review of the art JO - Journal of Materials Science VL - 45 UR - https://doi.org/10.1007/s10853-010-4590-5 DO - 10.1007/s10853-010-4590-5 ID - Rebouillat2010 ER - TY - BOOK AU - Saville, B. PY - 1999 DA - 1999// TI - Physical testing of textiles PB - Elsevier CY - Amsterdam UR - https://doi.org/10.1201/9781439822753 DO - 10.1201/9781439822753 ID - Saville1999 ER - TY - JOUR AU - Shin, H. -. S. AU - Erlich, D. AU - Shockey, D. PY - 2003 DA - 2003// TI - Test for measuring cut resistance of yarns JO - Journal of Materials Science VL - 38 UR - https://doi.org/10.1023/A:1025673213604 DO - 10.1023/A:1025673213604 ID - Shin2003 ER - TY - JOUR AU - Shin, H. -. S. AU - Erlich, D. C. AU - Simons, J. W. AU - Shockey, D. A. PY - 2006 DA - 2006// TI - Cut resistance of high-strength yarns JO - Textile Research Journal VL - 76 UR - https://doi.org/10.1177/0040517506067335 DO - 10.1177/0040517506067335 ID - Shin2006 ER - TY - STD TI - Standard, E. (2003). 388,. Protective Gloves Against Mechanical Risks, European Committee for Standardization, 19. ID - ref34 ER - TY - STD TI - Stansbury, B. (1980). Highly stretchable glove and form for making same: Google patents. ID - ref35 ER - TY - JOUR AU - Sun, L. L. AU - Xiong, D. S. AU - Xu, C. Y. PY - 2013 DA - 2013// TI - Application of shear thickening fluid in ultra high molecular weight polyethylene fabric JO - Journal of Applied Polymer Science VL - 129 UR - https://doi.org/10.1002/app.38844 DO - 10.1002/app.38844 ID - Sun2013 ER - TY - JOUR AU - Thi, B. V. AU - Vu-Khanh, T. AU - Lara, J. PY - 2009 DA - 2009// TI - Mechanics and mechanism of cut resistance of protective materials JO - Theoretical and applied fracture mechanics VL - 52 UR - https://doi.org/10.1016/j.tafmec.2009.06.008 DO - 10.1016/j.tafmec.2009.06.008 ID - Thi2009 ER - TY - JOUR AU - Tien, D. T. AU - Kim, J. S. AU - Huh, Y. PY - 2010 DA - 2010// TI - Stab-resistant property of the fabrics woven with the aramid/cotton core-spun yarns JO - Fibers and Polymers VL - 11 UR - https://doi.org/10.1007/s12221-010-0500-3 DO - 10.1007/s12221-010-0500-3 ID - Tien2010 ER - TY - JOUR AU - Ulbricht, V. AU - Franeck, J. AU - Schirmacher, F. AU - Offermann, P. PY - 2003 DA - 2003// TI - Numerical investigations for cutting of wires and thread JO - Autex Research Journal VL - 3 ID - Ulbricht2003 ER - TY - JOUR AU - Holland, B. J. AU - Soer, R. AU - Boer, M. R. AU - Reneman, M. F. AU - Brouwer, S. PY - 2015 DA - 2015// TI - Preventive occupational health interventions in the meat processing industry in upper-middle and high-income countries: a systematic review on their effectiveness JO - International Archives of Occupational and Environmental Health VL - 88 UR - https://doi.org/10.1007/s00420-014-0964-3 DO - 10.1007/s00420-014-0964-3 ID - Holland2015 ER - TY - JOUR AU - Wang, Y. AU - Miao, Y. AU - Swenson, D. AU - Cheeseman, B. A. AU - Yen, C. -. F. AU - LaMattina, B. PY - 2010 DA - 2010// TI - Digital element approach for simulating impact and penetration of textiles JO - International Journal of Impact Engineering VL - 37 UR - https://doi.org/10.1016/j.ijimpeng.2009.10.009 DO - 10.1016/j.ijimpeng.2009.10.009 ID - Wang2010 ER - TY - JOUR AU - Wu, G. PY - 2004 DA - 2004// TI - Oxygen plasma treatment of high performance fibers for composites JO - Materials Chemistry and Physics VL - 85 UR - https://doi.org/10.1016/j.matchemphys.2003.12.004 DO - 10.1016/j.matchemphys.2003.12.004 ID - Wu2004 ER -