International Journal of Interdisciplinary Research
Table 10 Influential SL and material jetting process parameters on other mechanical properties
From: Performance of wearables and the effect of user behavior in additive manufacturing process
AM process /material | Layer thickness (mm) | Part orientation | Postprocess stage | Impact strength (KJ/m2) | Compressive strength (MPa) | Yield strength (MPa) | Elongation (%) | Ref. | ||
|---|---|---|---|---|---|---|---|---|---|---|
PJ/ROMa | Â | Flat-X | Â | Â | Â | Â | Â | Â | 6.57 | Das et al. (2018) |
Flat-45 | 6.45 | |||||||||
Flat-Y | 6.21 | |||||||||
Vert-X | 7.28 | |||||||||
Vert-45 | 6.94 | |||||||||
Vert-Y | 6.51 | |||||||||
SLA/composite resin | Â | Horizontal, vertical | Â | Â | Â | 257.7 | Â | Â | Â | Alharbi et al. (2016) |
297.7 | ||||||||||
SL/TSRb, Somosc, Accurad | 0.15/0.1/0.1 | Horizontal, vertical | Â | Peak load (N) 450 | Peak load (N) 390 | 54 | 50 | Â | Â | Kim and Oh (2008) |
FDM/ABSe | 0.254 | 470–820 | 160–440 | 41–65 | 42–66 | |||||
LS/PAf | 0.1/0.15 | 390–690 for horizontal | 490–770 for vertical | 60–72 for horizontal | 61–73 for vertical | |||||
PJ/ABPg | Â | ZX | Â | Â | Â | Â | Â | Â | 9.26 | Kesy and Kotlinski (2010) |
XZ | 23.44 | |||||||||
XY | 4.04 | |||||||||
PJ/ROMa, ABPg |  |  | Room T, liquid nitrogen T, immersed in liquid helium |  |  | 86–431 |  | 32 |  | Weiss et al. (2015) |
FDM/ABSe | 50–101 | 33 | ||||||||