Fig. 17From: Automatic Segmentation and 3D Printing of A-shaped Manikins using a Bounding Box and Body-feature PointsEffect of slicing on filament amount (image generated by Sindoh® 3D WOX slicing software). a Original cube 5 × 5 × 5 cm3, b 1-time sliced cube, c 2-times sliced cube, and d 3-times sliced cube. Left: Original mesh, Right: Cross-sectional view of g-code, where green dashed grids mean inner support structure and red/yellow line means surface layerBack to article page