International Journal of Interdisciplinary Research
Table 5 Analytical results for dynamic drapability under a constant force
From: Development of a test method for the dynamic drapability of fabrics using reciprocating motion
Condition | 25 mm, 100 rpm | 100 mm, 50 rpm | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Sample | R1 | R2 | R3 | R4 | R5 | R1 | R2 | R3 | R4 | R5 |
(a) Reciprocation of 25 mm width and 100 rpm speed vs. reciprocation of 100 mm with and 50 rpm speed | ||||||||||
Analysis image |
|
|
|
|
|
|
|
|
|
|
Number of nodes | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Node position (cm) | – | – | 87.36 | – | – | – | – | – | – | – |
Amplitude (cm) | 6.72 | 7.54 | 8.20 | 8.05 | 8.37 | 19.92 | – | – | – | – |
Total length (cm) | 98.89 | 99.09 | 98.35 | 100.00 | 100.00 | 100.00 | 100.00 | 100.00 | 100.00 | 100.00 |
Area (cm2) | 798.43 | 770.86 | 798.76 | 896.41 | 875.65 | 2155.22 | 2078.98 | 1861.61 | 1945.63 | 2054.64 |
Condition | 25 mm, 200 rpm | 100 mm, 100 rpm | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Sample | R1 | R2 | R3 | R4 | R5 | R1 | R2 | R3 | R4 | R5 |
(b) Reciprocation of 25 mm width and 200 rpm speed vs. reciprocation of 100 mm with and 100 rpm speed | ||||||||||
Analysis image |
|
|
|
|
|
|
|
|
|
|
Number of nodes | 2 | 2 | 2 | 2 | 0 | 1 | 0 | 0 | 0 | 0 |
Node position (cm) | 42.49/76.74 | 57.36/86.79 | 58.79/ 92.68 | 57.36/86.79 | – | 76.19 | – | – | – | – |
Amplitude (cm) | 6.53/7.70 | 6.05/7.06 | 6.2/6.52 | 6.05/7.06 | – | 19.75 | 23.70 | 21.36 | 25.10 | 20.01 |
Total length (cm) | 96.34 | 96.97 | 97.80 | 96.97 | 99.82 | 99.45 | 99.36 | 100.00 | 99.57 | 100.00 |
Area (cm2) | 596.38 | 509.12 | 497.57 | 509.12 | 673.05 | 1580.60 | 2064.37 | 2016.57 | 1686.79 | 1722.08 |
