International Journal of Interdisciplinary Research
Table 7 Analytical results for identifying the optimal condition for measuring dynamic drapability
From: Development of a test method for the dynamic drapability of fabrics using reciprocating motion
Condition | 50 mm, 150 rpm | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Sample | R1 | R12 | R2 | R23 | R3 | R34 | R4 | R45 | R5 |
Analysis image |
|
|
|
|
|
|
|
|
|
Number of nodes | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Node position (cm) | 55.13 | 60.62 | 69.21 | 74.36 | 71.61 | 72.72 | 73.26 | 77.02 | 75.64 |
Amplitude (cm) | 12.39 | 10.21 | 11.26 | 11.55 | 10.54 | 11.05 | 11.25 | 10.67 | 11.55 |
Total length (cm) | 99.27 | 97.62 | 99.56 | 99.09 | 99.45 | 99.27 | 99.27 | 100.00 | 100.00 |
Area (cm2) | 1001.23 | 762.09 | 894.08 | 917.60 | 939.96 | 945.28 | 939.64 | 917.59 | 946.37 |
Condition | 75 mm, 150 rpm | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Sample | R1 | R12 | R2 | R23 | R3 | R34 | R4 | R45 | R5 |
Analysis image |
|
|
|
|
|
|
|
|
|
Number of nodes | 2 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Node position (cm) | 57.33/91.39 | 61.35 | 67.73 | 71.61 | 73.26 | 71.80 | 73.99 | 74.19 | 76.68 |
Amplitude (cm) | 16.90/16.73 | 16.40 | 16.64 | 16.07 | 15.23 | 15.73 | 16.73 | 17.14 | 16.81 |
Total length (cm) | 95.85 | 97.44 | 96.04 | 97.25 | 98.32 | 98.72 | 98.71 | 98.62 | 100.00 |
Area (cm2) | 1349.62 | 1284.62 | 1181.52 | 1103.21 | 1275.84 | 1484.18 | 1339.68 | 1362.63 | 1277.76 |
Condition | 100 mm, 150 rpm | ||||||||
|---|---|---|---|---|---|---|---|---|---|
Sample | R1 | R12 | R2 | R23 | R3 | R34 | R4 | R45 | R5 |
Analysis image |
|
|
|
|
|
|
|
|
|
Number of nodes | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
Node position (cm) | 58.61 | 60.62 | 69.21 | 71.98 | 72.34 | 72.98 | 73.99 | 75.87 | 78.46 |
Amplitude (cm) | 19.38 | 19.67 | 20.84 | 19.58 | 19.75 | 20.25 | 20.08 | 22.48 | 22.02 |
Total length (cm) | 95.97 | 96.80 | 96.97 | 94.87 | 97.07 | 96.34 | 97.44 | 98.63 | 99.93 |
