Skip to main content

International Journal of Interdisciplinary Research

Correction to: The development of a performance hand wear and tools product innovation framework

The Original Article was published on 25 May 2020

Correction to: Fash Text (2020) 7:15

Following publication of the original article (Sokolowski 2020), the author identified an error in Fig. 4. The correct figure is given.

Fig. 4
figure 4

Example of 3D hand scan processing in Rhino software and Stand Development (Sokolowski and Corr 2018)


Download references

Author information

Authors and Affiliations


Corresponding author

Correspondence to Susan L. Sokolowski.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sokolowski, S.L. Correction to: The development of a performance hand wear and tools product innovation framework. Fash Text 7, 26 (2020).

Download citation

  • Published:

  • DOI: